It’s easy to Get inspired to update your home when you see how much blinds can change a space. A new texture, a bolder color, or a modern pattern can instantly lift your interior design. Inspiration comes naturally when you realize how simple and satisfying it is to give your windows a fresh new look.

Start by measuring the width and length of the window. Then transfer these measurements to your fabric. Using a sharp pair of scissors, cut the fabric to fit these dimensions. Be sure to leave at least 6-inches of extra fabric for finishing purposes. You’ll also need to cut a couple of eye screws for each dowel or slat. These will serve as the way you can string up your homemade blinds.

The Simple Guide to DIY Blinds

When finished, add a 2-inch pocket at the top for your curtain rod. You can also use this opportunity to sew ties for each side of the fabric. If you prefer to avoid sewing, glue wooden strips and dowels to the back of the blinds.

Then, attach the headrail and roller to the wall with screws. Remove the cap and bottom bar on the headrail so that nothing is holding them in place. Then position the slats, spaced about 10 in (25 cm) apart, onto the fabric. When you’re done, position the pull cords through each dowel or slat. Be sure not to get any glue on the cords.